Edge Evolution CTS2 Installation Instructions and Manual

Time Required: 10 to 20 minutes

Installation Difficulty: Easy

Tools Needed: None 

Manuals

Make/Model

Link to Manual

All

Installation Instructions

Installation and setup information can be found below.

  • Download the Fusion software installer from the Updates tab on Edge Products' website. This process is required for your programmer to work correctly, and it should take less than ten minutes. Works on PC computers only!
  • Once downloaded, run the FusionClientSetup.exe file
  • Follow the prompts to set an installation location and install the software.
  • Open the Fusion icon now on your desktop and create a new user
  • An email will be sent to you with your new password to access the Fusion software
  • Unbox the CTS2 and connect the monitor to the computer using the provided USB cable
  • Follow the prompts to update the CTS2 monitor, choosing all options to “continue anyway”

Optional: If you wish to install custom images on the CTS2 or need to setup any of the Expandable Accessory sensors, you will need to the MyStyle software as well:

  • Download the Mystyle software installer from the Updates tab on Edge Products' website. Works on PC computers only!
  • Once downloaded, run the MyStleSetup.exe file
  • Follow the prompts to set an installation location and install the software.
  • Open the MyStyle icon now on your desktop to start the software
  • Connect the CTS2 to the computer using the provided USB cable
  • Select your monitor in the software and follow the prompts to add/edit custom images